Calculates the estimated number of bricks and mortar needed for a wall, considering wall dimensions and brick size.
Start with your values, or try a preset.
Enter Wall Length, Wall Height, Brick Length, Brick Height, and Mortar Joint Thickness in the units shown.
Read Brick Area (including mortar), Wall Area, Brick Area in Square Feet, Estimated Number of Bricks, and Estimated Mortar Volume in the results panel. Results update as you change the inputs.
Choose a preset to load an example, then adjust the values for your situation.
See the inputs and their calculated results.
Wall Length: 5 feet; Wall Height: 6 feet; Brick Length: 8 inches; Brick Height: 4 inches; Mortar Joint Thickness: 0.375 inches
Brick Area (including mortar): 36.640625 square inches; Wall Area: 30 square feet; Brick Area in Square Feet: 0.2544487847 square feet; Estimated Number of Bricks: 117.901919 bricks; Estimated Mortar Volume: 0.9375 cubic feet
Wall Length: 10 feet; Wall Height: 8 feet; Brick Length: 8 inches; Brick Height: 4 inches; Mortar Joint Thickness: 0.375 inches
Brick Area (including mortar): 36.640625 square inches; Wall Area: 80 square feet; Brick Area in Square Feet: 0.2544487847 square feet; Estimated Number of Bricks: 314.4051173 bricks; Estimated Mortar Volume: 2.5 cubic feet
Wall Length: 20 feet; Wall Height: 10 feet; Brick Length: 8 inches; Brick Height: 4 inches; Mortar Joint Thickness: 0.375 inches
Brick Area (including mortar): 36.640625 square inches; Wall Area: 200 square feet; Brick Area in Square Feet: 0.2544487847 square feet; Estimated Number of Bricks: 786.0127932 bricks; Estimated Mortar Volume: 6.25 cubic feet
Continue with another tool on a related topic.
Estimates how many items or boxes fit on a standard pallet or how many pallets are needed for a shipment.
Calculates the number of light bulbs needed to adequately illuminate a room based on its dimensions, desired light level, and bulb specifications.
Converts a decimal inch measurement into its equivalent fractional representation (inches and fractions of an inch).
Calculates the taper length and angle based on the large diameter, small diameter, and taper length.