Estimates how many items or boxes fit on a standard pallet or how many pallets are needed for a shipment.
Start with your values, or try a preset.
Enter Item Length (inches), Item Width (inches), Item Height (inches), Pallet Length (inches), Pallet Width (inches), Available Pallet Height (inches), Items per Box, and Total Items to Ship in the units shown.
Read Layers per Pallet, Items per Pallet (Widthwise), Items per Pallet (Lengthwise), Items per Layer, Items per Pallet, Pallets Needed, and Boxes per Pallet in the results panel. Results update as you change the inputs.
Choose a preset to load an example, then adjust the values for your situation.
See the inputs and their calculated results.
Item Length (inches): 6; Item Width (inches): 6; Item Height (inches): 6; Pallet Length (inches): 48; Pallet Width (inches): 40; Available Pallet Height (inches): 48; Items per Box: 1; Total Items to Ship: 100
Layers per Pallet: 8; Items per Pallet (Widthwise): 6; Items per Pallet (Lengthwise): 8; Items per Layer: 48; Items per Pallet: 384; Pallets Needed: 1; Boxes per Pallet: 384
Item Length (inches): 12; Item Width (inches): 12; Item Height (inches): 12; Pallet Length (inches): 48; Pallet Width (inches): 40; Available Pallet Height (inches): 48; Items per Box: 1; Total Items to Ship: 100
Layers per Pallet: 4; Items per Pallet (Widthwise): 3; Items per Pallet (Lengthwise): 4; Items per Layer: 12; Items per Pallet: 48; Pallets Needed: 3; Boxes per Pallet: 48
Item Length (inches): 24; Item Width (inches): 24; Item Height (inches): 24; Pallet Length (inches): 48; Pallet Width (inches): 40; Available Pallet Height (inches): 48; Items per Box: 1; Total Items to Ship: 100
Layers per Pallet: 2; Items per Pallet (Widthwise): 1; Items per Pallet (Lengthwise): 2; Items per Layer: 2; Items per Pallet: 4; Pallets Needed: 25; Boxes per Pallet: 4
Continue with another tool on a related topic.
Calculates the number of light bulbs needed to adequately illuminate a room based on its dimensions, desired light level, and bulb specifications.
Converts a decimal inch measurement into its equivalent fractional representation (inches and fractions of an inch).
Calculates the taper length and angle based on the large diameter, small diameter, and taper length.
Calculates the estimated force needed to punch a hole in a material. This is based on the material's shear strength, the thickness of the material, and the perimeter of the hole.