Small Gable Shed
Shed Length (feet): 8 ft; Shed Width (feet): 6 ft; Roof Type: Gable; Material Cost per Square Foot ($): 10; Labor Cost Multiplier (0 for DIY): 0
Shed Area: 48 sq ft; Material Cost: 480 $; Estimated Total Cost: 480 $
DIY Shed Cost Calculator
Construction0.0(0)
Estimates the cost of building a shed, considering size and roof type.
How To Use
How to use this calculator
Start with your values, or try a preset.
Step 1
Enter Shed Length (feet), Shed Width (feet), Roof Type, Material Cost per Square Foot ($), and Labor Cost Multiplier (0 for DIY) in the units shown.
Step 2
Read Shed Area, Material Cost, and Estimated Total Cost in the results panel. Results update as you change the inputs.
Step 3
Choose a preset to load an example, then adjust the values for your situation.
Worked Examples
Example calculations
See the inputs and their calculated results.
Medium Shed Roof
Shed Length (feet): 12 ft; Shed Width (feet): 8 ft; Roof Type: Shed (Slant); Material Cost per Square Foot ($): 12; Labor Cost Multiplier (0 for DIY): 0.15
Shed Area: 96 sq ft; Material Cost: 1,152 $; Estimated Total Cost: 1,324.8 $
Large Flat Roof Shed
Shed Length (feet): 16 ft; Shed Width (feet): 10 ft; Roof Type: Flat; Material Cost per Square Foot ($): 15; Labor Cost Multiplier (0 for DIY): 0
Shed Area: 160 sq ft; Material Cost: 2,400 $; Estimated Total Cost: 2,400 $
People Also Calculate
Related Calculators
Continue with another tool on a related topic.
Construction
Pallet Calculator
Estimates how many items or boxes fit on a standard pallet or how many pallets are needed for a shipment.
1,776 viewsOpen calculator
Construction
Lighting Calculator
Calculates the number of light bulbs needed to adequately illuminate a room based on its dimensions, desired light level, and bulb specifications.
1,422 viewsOpen calculator
Construction
Inches to Fraction Calculator
Converts a decimal inch measurement into its equivalent fractional representation (inches and fractions of an inch).
1,365 viewsOpen calculator
Construction
Taper Calculator
Calculates the taper length and angle based on the large diameter, small diameter, and taper length.
1,331 viewsOpen calculator