Calculates the volume of a cylindrical or rectangular hole and the amount of concrete needed to fill it.
Start with your values, or try a preset.
Enter Hole Shape, Diameter of Hole (if cylindrical), Length of Hole (if rectangular), Width of Hole (if rectangular), and Depth of Hole in the units shown.
Read Hole Volume (Rectangular), Radius of Hole, Hole Volume (Cylindrical), Hole Volume, and Concrete Needed in the results panel. Results update as you change the inputs.
Choose a preset to load an example, then adjust the values for your situation.
See the inputs and their calculated results.
Hole Shape: Cylindrical; Diameter of Hole (if cylindrical): 0.5 feet; Length of Hole (if rectangular): 2 feet; Width of Hole (if rectangular): 1 feet; Depth of Hole: 1 feet
Hole Volume (Rectangular): 2 cubic feet; Radius of Hole: 0.25 feet; Hole Volume (Cylindrical): 0.196349375 cubic feet; Hole Volume: 0.196349375 cubic feet; Concrete Needed: 0.196349375 cubic feet
Hole Shape: Cylindrical; Diameter of Hole (if cylindrical): 2 feet; Length of Hole (if rectangular): 2 feet; Width of Hole (if rectangular): 1 feet; Depth of Hole: 4 feet
Hole Volume (Rectangular): 8 cubic feet; Radius of Hole: 1 feet; Hole Volume (Cylindrical): 12.56636 cubic feet; Hole Volume: 12.56636 cubic feet; Concrete Needed: 12.56636 cubic feet
Hole Shape: Rectangular; Diameter of Hole (if cylindrical): 1 feet; Length of Hole (if rectangular): 1 feet; Width of Hole (if rectangular): 1 feet; Depth of Hole: 1 feet
Hole Volume (Rectangular): 1 cubic feet; Radius of Hole: 0.5 feet; Hole Volume (Cylindrical): 0.7853975 cubic feet; Hole Volume: 1 cubic feet; Concrete Needed: 1 cubic feet
Continue with another tool on a related topic.
Estimates how many items or boxes fit on a standard pallet or how many pallets are needed for a shipment.
Calculates the number of light bulbs needed to adequately illuminate a room based on its dimensions, desired light level, and bulb specifications.
Converts a decimal inch measurement into its equivalent fractional representation (inches and fractions of an inch).
Calculates the taper length and angle based on the large diameter, small diameter, and taper length.