Rolling Offset Calculator

0.0(0)

Calculates the travel and run values for pipe rolling offsets, crucial for accurately positioning pipes in construction and plumbing.

How To Use

How to use this calculator

Start with your values, or try a preset.

Step 1

Enter Offset Angle (degrees), Offset Distance, and Pipe Diameter in the units shown.

Step 2

Read Run and Travel in the results panel. Results update as you change the inputs.

Step 3

Choose a preset to load an example, then adjust the values for your situation.

Worked Examples

See the inputs and their calculated results.

Offset Angle (degrees): 15 degrees; Offset Distance: 6 inches; Pipe Diameter: 4 inches

Run: 22.39230485 inches; Travel: 23.18221983 inches

Offset Angle (degrees): 30 degrees; Offset Distance: 12 inches; Pipe Diameter: 6 inches

Run: 20.78460969 inches; Travel: 24 inches

Offset Angle (degrees): 45 degrees; Offset Distance: 24 inches; Pipe Diameter: 8 inches

Run: 24 inches; Travel: 33.9411255 inches

People Also Calculate

Continue with another tool on a related topic.

Estimates how many items or boxes fit on a standard pallet or how many pallets are needed for a shipment.

Calculates the number of light bulbs needed to adequately illuminate a room based on its dimensions, desired light level, and bulb specifications.

Converts a decimal inch measurement into its equivalent fractional representation (inches and fractions of an inch).

Calculates the taper length and angle based on the large diameter, small diameter, and taper length.