Calculates the square footage and estimated cost for siding a house.
Start with your values, or try a preset.
Enter Average Wall Height (feet), Total Wall Length (feet), Total Window and Door Area (square feet), Siding Cost per Square Foot ($), and Waste Factor (%) in the units shown.
Read Wall Area (square feet), Net Siding Area (square feet), Total Siding Area (square feet), and Estimated Total Cost ($) in the results panel. Results update as you change the inputs.
Choose a preset to load an example, then adjust the values for your situation.
See the inputs and their calculated results.
Average Wall Height (feet): 8 ft; Total Wall Length (feet): 50 ft; Total Window and Door Area (square feet): 20 sq ft; Siding Cost per Square Foot ($): 7.5 $; Waste Factor (%): 10 %
Wall Area (square feet): 400; Net Siding Area (square feet): 380; Total Siding Area (square feet): 418; Estimated Total Cost ($): 3,135
Average Wall Height (feet): 9 ft; Total Wall Length (feet): 100 ft; Total Window and Door Area (square feet): 50 sq ft; Siding Cost per Square Foot ($): 8 $; Waste Factor (%): 10 %
Wall Area (square feet): 900; Net Siding Area (square feet): 850; Total Siding Area (square feet): 935; Estimated Total Cost ($): 7,480
Average Wall Height (feet): 10 ft; Total Wall Length (feet): 150 ft; Total Window and Door Area (square feet): 75 sq ft; Siding Cost per Square Foot ($): 9 $; Waste Factor (%): 10 %
Wall Area (square feet): 1,500; Net Siding Area (square feet): 1,425; Total Siding Area (square feet): 1,567.5; Estimated Total Cost ($): 14,107.5
Continue with another tool on a related topic.
Estimates how many items or boxes fit on a standard pallet or how many pallets are needed for a shipment.
Calculates the number of light bulbs needed to adequately illuminate a room based on its dimensions, desired light level, and bulb specifications.
Converts a decimal inch measurement into its equivalent fractional representation (inches and fractions of an inch).
Calculates the taper length and angle based on the large diameter, small diameter, and taper length.