Estimates the prefabricated components needed for a vinyl fence, including posts, rails, and pickets. This calculator assumes standard fence panel sizes and spacing.
Start with your values, or try a preset.
Enter Fence Length (feet), Post Spacing (inches), Fence Height (inches), Picket Width (inches), and Picket Spacing (inches) in the units shown.
Read Number of Rails per Panel (assumed), Panel Length (feet), Number of Posts, Number of Pickets per Panel, Total Number of Rails, and Total Number of Pickets in the results panel. Results update as you change the inputs.
Choose a preset to load an example, then adjust the values for your situation.
See the inputs and their calculated results.
Fence Length (feet): 50; Post Spacing (inches): 96; Fence Height (inches): 72; Picket Width (inches): 6; Picket Spacing (inches): 2
Number of Rails per Panel (assumed): 4; Panel Length (feet): 8; Number of Posts: 8; Number of Pickets per Panel: 12; Total Number of Rails: 32; Total Number of Pickets: 84
Fence Length (feet): 100; Post Spacing (inches): 96; Fence Height (inches): 72; Picket Width (inches): 6; Picket Spacing (inches): 2
Number of Rails per Panel (assumed): 4; Panel Length (feet): 8; Number of Posts: 14; Number of Pickets per Panel: 12; Total Number of Rails: 56; Total Number of Pickets: 156
Fence Length (feet): 200; Post Spacing (inches): 96; Fence Height (inches): 72; Picket Width (inches): 6; Picket Spacing (inches): 2
Number of Rails per Panel (assumed): 4; Panel Length (feet): 8; Number of Posts: 26; Number of Pickets per Panel: 12; Total Number of Rails: 104; Total Number of Pickets: 300
Continue with another tool on a related topic.
Estimates how many items or boxes fit on a standard pallet or how many pallets are needed for a shipment.
Calculates the number of light bulbs needed to adequately illuminate a room based on its dimensions, desired light level, and bulb specifications.
Converts a decimal inch measurement into its equivalent fractional representation (inches and fractions of an inch).
Calculates the taper length and angle based on the large diameter, small diameter, and taper length.