Angle Cut Calculator for Knee Bracing

0.0(0)

Calculates the angle cuts needed for knee bracing based on the desired angle and brace dimensions.

How To Use

How to use this calculator

Start with your values, or try a preset.

Step 1

Enter Desired Angle (degrees), Brace Thickness, and Brace Width in the units shown.

Step 2

Read Bevel Angle and Cut Angle in the results panel. Results update as you change the inputs.

Step 3

Choose a preset to load an example, then adjust the values for your situation.

Worked Examples

See the inputs and their calculated results.

Desired Angle (degrees): 45 degrees; Brace Thickness: 2 inches; Brace Width: 4 inches

Bevel Angle: 45 degrees; Cut Angle: 45 degrees

Desired Angle (degrees): 30 degrees; Brace Thickness: 2 inches; Brace Width: 4 inches

Bevel Angle: 60 degrees; Cut Angle: 30 degrees

Desired Angle (degrees): 60 degrees; Brace Thickness: 2 inches; Brace Width: 4 inches

Bevel Angle: 30 degrees; Cut Angle: 60 degrees

People Also Calculate

Continue with another tool on a related topic.

Estimates how many items or boxes fit on a standard pallet or how many pallets are needed for a shipment.

Calculates the number of light bulbs needed to adequately illuminate a room based on its dimensions, desired light level, and bulb specifications.

Converts a decimal inch measurement into its equivalent fractional representation (inches and fractions of an inch).

Calculates the taper length and angle based on the large diameter, small diameter, and taper length.