A tool for performing arithmetic operations on measurements in feet and inches, including fractions and decimals.
Start with your values, or try a preset.
Enter Feet 1, Inches 1, Feet 2, Inches 2, Operation, and Multiplier/Divisor (for Multiply/Divide) in the units shown.
Read Total Inches 2, Total Inches 1, Result in Inches, Result in Remaining Inches, and Result in Feet in the results panel. Results update as you change the inputs.
Choose a preset to load an example, then adjust the values for your situation.
See the inputs and their calculated results.
Feet 1: 2 ft; Inches 1: 6 in; Feet 2: 3 ft; Inches 2: 0 in; Operation: Add; Multiplier/Divisor (for Multiply/Divide): 1
Total Inches 2: 36 in; Total Inches 1: 30 in; Result in Inches: 66 in; Result in Remaining Inches: 6 in; Result in Feet: 5 ft
Feet 1: 5 ft; Inches 1: 0 in; Feet 2: 1 ft; Inches 2: 3 in; Operation: Subtract; Multiplier/Divisor (for Multiply/Divide): 1
Total Inches 2: 15 in; Total Inches 1: 60 in; Result in Inches: 45 in; Result in Remaining Inches: 9 in; Result in Feet: 3 ft
Feet 1: 2 ft; Inches 1: 0 in; Feet 2: 0 ft; Inches 2: 0 in; Operation: Multiply; Multiplier/Divisor (for Multiply/Divide): 2
Total Inches 2: 0 in; Total Inches 1: 24 in; Result in Inches: 48 in; Result in Remaining Inches: 0 in; Result in Feet: 4 ft
Continue with another tool on a related topic.
Estimates how many items or boxes fit on a standard pallet or how many pallets are needed for a shipment.
Calculates the number of light bulbs needed to adequately illuminate a room based on its dimensions, desired light level, and bulb specifications.
Converts a decimal inch measurement into its equivalent fractional representation (inches and fractions of an inch).
Calculates the taper length and angle based on the large diameter, small diameter, and taper length.